How to Repair Deep Car Scratches For Only $75

deep bumper scratch

Taking your car to a body shop to repair deep paint scratches can cost anywhere from $500 – $1,000. Many people don’t know that this expensive repair can be done at home with very little time and money. With the right tools and a good amount of patience, your car will look like nothing ever happened.

Learn the exact repair techniques professionals at the body shop use to repair deep scratches. There is no good reason to pay someone hundreds of dollars of your hard-earned money to repair these scratches when you can do it yourself for a fraction of the cost.

In this post, I will tell you how to fix deep car scratches for only $75. First, determine how deep the scratch is. The scratch on the photodamaged the clear coat, paint layers, and some primer, but didn’t damage the metal.

This scratch can be easily fixed in just a few hours and for only $75. No experience is needed. I recommend fixing all the scratches as soon as you can to avoid rust development.

Here are the products I recommend using for this repair. Since I am just linking to the websites that sell these products, the prices could change in the future, but you should still be able to stay within $75.

Items you will need:

  • Assorted Wet/Dry Sandpaper$4.95 – This pack includes 5 sheets of assorted sandpaper (1 sheet each of 180, 320, 600, 1000, and 1500) and can be used for sanding primer, clear coats,  and automotive paints. Buying assorted packs is a great way to save money. If you buy each grit separately, it will cost you about  $35 for all of them.
  • Primer$11.95 – 12 oz. aerosol acrylic lacquer primer that can be used over bare plastic, metal, and spot putty. This easy-to-sand primer will help you create a uniform surface and fill in sand scratches.
  • Touch Up Paint$26.95– 12 oz. custom aerosol spray paint matching your car. This paint is high quality and is easy to apply.
  • Clear Coat$13.9512 oz. aerosol spray can.
  • Meguiar’s Ultimate Compound$13 – You can use any rubbing compound you like, just make sure it is clear coat safe. Meguiar’s Ultimate Compound is the best car scratch remover I’ve ever tried. It removes light-to-deep clear coat scratches, swirl marks, stains, and heavy oxidation in just a few minutes. It’s clear coat safe and inexpensive.

—————————————
YOUR TOTAL: $75

Optional Items:

  • Aerosol Spray Trigger – I put this item under optional items, however, I think it is a must-have when it comes to spray paint. It turns a spray aerosol can into a spray gun making it easier to apply the paint and the clear coat.
  • Prep solvent – It removes oils, road grease, dirt, car wax, and other surface contaminants and also improves adhesion to the surface.
  • Meguiar’s Ultimate Polish – Use your favorite polishing compound. I like Meguiar’s Ultimate Polish because it uses diminishing abrasive technology, meaning the tiny abrasives break down gradually as you rub. The paint color will look bolder and brighter with a smooth, sleek shine. It is high quality, inexpensive, long-lasting, and clear coat-safe.
  • Meguiar’s Tech Wax – Use your favorite wax. I like Meguiar’s NXT Generation Tech Wax. This product is amazing because not only does it give the deepest and clearest shine you’ve ever seen, but it also acts as a paint sealer giving your car long-lasting protection.
  • Microfiber Towel – Avoid using other materials such as bath towels, paper towels, or washcloths, as they might leave scratches on the clear coat.
  • Respirator, Gloves, Goggles Car Paint Touch Up
  • Applicator Pads – These pads are used to apply rubbing compound, polish, and wax.
  • Auto Masking tape

All of the above products are very inexpensive, but high quality. Although the goal is to save money, lower-quality products might compromise the final result.

Video Tutorial: How to Repair Deep Car Scratches For Only $75

Step 1: Getting the paint

Start by locating your car’s paint code. It might be on the side of the door jamb, glove box, or trunk. Sometimes it is hard to find. Here is a sample label that can be found on Honda. There are a lot of numbers on the label and it might be difficult to figure out which one is the color code. The paint color code for this car is YR562PX.

If you feel confused about color codes, you can go to the site that sells auto paint and find your color code by selecting the make, model, and year of your car. Even if the site displays a few blue color codes, it will be easier for you to compare it to the label and see if one of the codes is there.

After you’ve found the code, it is time to order a touch-up paint. Touch-up paint comes in a spray can, paint pen, or a bottle with a brush. Spray painting is the most effective way to repair a deep paint scratch.

For small areas, you really don’t need a lot of paint, so a 12 oz spray can should be more than enough. You can buy it online or at the dealership. If you trying to stay under $50, you should definitely order everything online.

Step 2: Preparing the area

Check for rust. If you notice rust development, use rust remover. Don’t forget to wear gloves when working with chemicals. Apply rust remover and let it penetrate the rust for about 10 min. Rinse off the area with clean water.

Next, remove all the dirt around the scratch with warm water and dish soap. Oils, wax, and grease are difficult to remove with water, so follow it with prep solvent. When the area is clean, dry it completely. By the end of this step, you should have a clean surface to work with.

clean the area

Step 3: Masking

Mask the area using auto masking tape and old newspapers to prevent overspray from the primer and the paint. Instead of newspapers, you can use a plastic cover. I don’t recommend using duct tape since it can leave residue.

While protecting the car from overspray, you want to make sure you leave enough space for even blending of the primer and the paint.

In the video, you can see how they masked off the whole bumper panel. If you don’t leave enough space, you will get a line that will be hard to remove.

mask the area
mask the area

Step 3: Sanding

Sand the area with 600-grit sandpaper using circular motions. You can do “dry sanding” or “wet sanding”. I personally like wet sanding more because it is faster. But you can do it either way.

To wet sand the area, start by soaking sandpaper in cold water for 10 min. Use dishwasher soap to make the surface more slippery. Wash off the sandpaper after 4-5 sweeps.

sand the scratches

Wet sand the area that might get some touch-up paint and clear coat with wet/dry 1,500 grit sandpaper. Make sure to use a lot of water.

sand the area around

The final result should be a smooth surface without any pumps or scratches. If the surface is not perfectly smooth, all imperfections will multiply when you apply paint.   Don’t worry about scratching the paint near the scratch, it will be covered with new paint.

Note: Auto sandpaper is not the same as wood sandpaper. Wood sandpaper is too rough and will leave scratches. For wet sanding make sure it says wet/dry on the sandpaper label.

Step 4: Prep solvent

After sanding is done, clean the area with prep solvent to get rid of the dust. Spray the prep solvent and wipe it off with a clean microfiber cloth. Don’t forget to dry the area before applying primer.

clean the area

Step 5: Applying Primer

The primer will prevent metal from rust and create a uniform surface filling in sand scratches. Also, paint sticks better to primer than metal or plastic.

Primer comes in four colors: black, gray, red,  and white. The idea is to buy a primer that is closest to your paint color so you will need fewer paint coats to cover it. Since you are working on a small area, 12 oz. aerosol primer will be enough.

Shake the can. Evenly spray the area holding the can about 15-20 inches away from the surface. Apply 3 coats giving each coat about 10 min drying time.

If you purchased your primer somewhere else, it might have a different drying time. Make sure to check the label for instructions before applying.

apply primer

Note: Primer covers 180-320 grit sand scratches.

Step 6: Sanding Primer

In this step, you want to smooth out the primer a little.  Allow the primer to dry for 30 min before sanding. Start with wet/dry 600-grit sandpaper and follow it with wet/dry 1,000 grit.

I would recommend doing a wet sanding instead of a dry one. It clogs less and sands faster. When you are done with sanding, dry the area.

Tip: Wrap sandpaper around a sponge to avoid fingerprints.

Step 7: Painting

Now you are ready to paint also called “base coat”. Using a plastic trigger to convert a paint can into a spray gun will make the application much easier.

Test the touch-up paint first in the hidden spot, to make sure the colors match. Shake the can. Evenly spray the area holding the can 15-20 inches away from the surface.

The idea is to blend the new paint with the old one by spraying each coat a little farther from the damaged area.

This method is called “feathering”. Apply 3 coats. Give each coat about 10-15 minutes of drying time.

Wait for 30 minutes before applying a clear coat. If you spray the paint, it can be easily removed with a rubbing compound later.

So far I think all the steps looked pretty easy and you have only a few steps to finish the job. At the end of these steps, the surface might look dull compared to the rest of the finish.

But don’t worry, it will be shiny like the rest of your car after you apply the clear coat. You are almost done.

Step 9: Applying Clear Coat

The clear coat protects the car’s paint from UV lights, scratches, and chips. Auto paint is very fragile, but applying a clear coat makes it stronger. It also makes the surface more slippery and gives it a nice shine.

Using a plastic trigger on the can will make the application more even. Shake the can well. Apply 3-4 coats leaving 10-15 min drying time for each coat. Each coat should look wet and glossy but not dripping. When the last coat is dry, remove the masking paper. Wait 24 hours before applying the rubbing compound.

Note: The auto-clear coat is different from the clear coat for nails. A nail clear coat also called a top coat, is designed to protect nails, not a car. It will last only a few days and then will start chipping off.

apply clear coat

Step 10: Applying Rubbing compound

The rubbing compound is used to add gloss and remove imperfections from the clear coat. Although rubbing compound is sometimes referred to as a “polisher”, rubbing compound and polishing compound are not the same.

Both products are designed to remove imperfections from the clear coat, but the rubbing compound is more abrasive than polishing. Rubbing compound is also used to remove overspray.

Start by reading instructions. Place a few drops on the application pad and make a few sweeps using circular motion. Remove residue with a clean microfiber cloth. Avoid using paper towels or old T-shirts. They are too rough and might leave ugly scratches on the clear coat.

microfiber cloth

Note: Clear coat overspray, dust, or orange peel, can be removed by sanding it with wet/dry 1,500 grit sandpaper.

Step 11: Applying Polish

car polish

This step is optional. If you want to have the showroom shine, use the polishing compound. You can apply it by hand or you can use a buffing/polishing machine.

Apply polish using a clean applicator pad to one section at a time using moderate pressure. Wipe clean with a soft microfiber cloth. Turn the cloth and buff. If you are using a dual-action polisher, apply it to one section at a time. Wipe dry with a microfiber cloth and then buff.

Step 12: Wax

Wait for 30 days before applying wax.

final result

40 thoughts on “How to Repair Deep Car Scratches For Only $75”

    • Hi Terri. Just click on the product links in my article and it should take you to the product page.

    • Hi Shane. This is just how the damaged area looks after sanding. The outline is the edge of paint layer.

    • Hi Robert. Matching color of primer can help you. The closer the color of the primer is the color of the car, the less paint coats you will need to apply.

  1. *claps hands excitedly!* Thank you ever so very much!!!!! My husband is a super busy man and so I don’t like to bother him with petty complaints, but the scratches on our car really have bothered me for a while. Now I can fix it myself! And for less money than a grocery trip!

  2. Hi this was very interesting indeed and that is exactly how I damaged my car. Bt where can I find the product kit around south africa????

  3. Hello, will this work on chipped off paint. I got a super cheap paint job, and the paint is chipping off on the back…can I use this method on my chipped paint.

    • Hi Judy. I am planning on writing a post about chipped paint. Yes. This will work. Just make sure to sand all the chipped paint so that the surface is smooth. If the primer is not damaged you can just apply few layers of paint and follow it with clear coat.

  4. Hi, sorry if this is a silly question but I’ve never done anything like this before and want to make sure I don’t overspray. When you say a “coat” of primer or paint, how long do you spray for to apply that coat?

    • Hi Jenny. It is like putting a thin coat of nail polish. Two even strokes over the same area would be a layer. You want to make sure each layer is not too thick so it dryes faster. You can always apply more layers if the primer is not completely covered after 3 layers.

  5. What primer would be better for me, grey, black, or your red, for my 07 acura tl moroccan red? Sort of a maroon. Would the red primer on this website be too bright or shall i be better off with grey? Thanks!

    • Hi Aaron. I think red primer will work great. You can really use any color. The closer is the color of the primer to the color of your car, the less paint coats you will need to apply.

  6. THANK YOU SO MUCH FOR POSTING THIS! During class today (because the parking lots at my university are really small) and I had scratched my brand new car against the cinderblock poles. The scratch was really similar to the one in the picture but it’s a short thick line.. I hope I can pull this off before my dad finds out! Thanks again! -Tina >_<

  7. Hi, this looks to be a great help and I will be using your advice in the coming weeks (weather permitting!) I was originally quoted around £300-400 for the repair so I will be saving a great deal. Many thanks again fella.

  8. Hey, nice write up. im half way done fixing my front bumper and I have to say, I would not have gotten anywhere without your work, this is my first time painting and it is turning out pretty well after seeing some other peoples work with “cans”.
    thanks!

  9. Hello, thanks for the very helpful website. I’m wondering if this particular tuturial would be applicable to painting a plastic bumper cover exhibiting similar paint scratches but with slight scuff marks on the plastic? Would the process be the same or would there be different steps involved?

    • Hi Jake. Thanks for visiting my site. I actually just posted a new tutorial on how to repair a plastic bumper. Most of the steps are the same. The only thing I would recommend is to spray plastic with plastic adhesion promoter first so that the primer sticks better. Primers don’t stick well to bare plastic. Hope this helps.

  10. Hi, firstly let me say thank you and well done for making such a brilliant site, it is just what every car owner needs.

    I have used the method above and my results look good, however where i have feathered the new paint you can see what looks like slight mottling, what has caused this and how can i resolve it? the centre of the newly painted area is perfect.

    Thanks martin

  11. This is a great website and I know i’ll be trying to learn a few things on here. I’m wondering if these same products would still be helpful for me since I only have small pebble size chips in paint (a lot of them in front bumper area), with some pebble size rust spots (4-5) around the bumper and hood area. I also have paint across the rear bumper that is starting to crack and looks faded (it looks like 4 – 5 circles of fading paint but up close I can see small cracks) but is hard to notice.

    • Hi Luis. I think that you should start by removing the rust with a rust remover. You can also sand it down with 120 grit sandpaper. If the damage is very small, use a primer pen to prime first and then use a touch up pen to apply paint. If you are planning on repairing a lot of small areas on one panel, it might be better to re-paint the whole panel. If those small scratches and chips are in different places, you can buy a small touch up paint bottle and just brush the damaged area with an art brush. So it all depends on the size of those scratches and chips. The rest of the steps should be the same: touch up paint, clear coat, rubbing compound and polisher. However, I think that regardless of the size of the damage, it is always great to have a touch up paint pen for a quick fix. Hope this helps.

  12. Thank you, so much…Your article just helped with the essay I had to write..A real lifesaver..It has also helped me understand the world of automotive repair and such much better…thank you thank you thank you.. :D

    • Hi Trisha. You are welcome! I am definitely not a writer but I am happy you got some useful info out of my site.

  13. Thanks for the reply. I’ve ordered the products for a minor touch up so I can at least fix the small spots of rust for now.

  14. Hi , I am getting ready to try this on my 2011 GMC Sierra. Do you think this can be done to the point where you wont know a repair has been made? Also can the spray triggers be reused, or is it one time use? Thanks

    • Hi Jim. With a little bit of patients you can definitely make it perfect and no one will know there was a repair. Besides sanding the area so it is smooth, the most important part is to blend the paint in. Otherwise it will look like a band aid on top of the car. If you wash the trigger right away, you can reuse it.

  15. Thanks for the great tutorial, probably the clearest I have seen on the internet. I have a few questions: When I’m spraying the coloured paint, is it ok to “feather” it onto clear coated areas? Will the paint adhere to existing clear coat? And ion some tutorials, they say you have to sand down the clear coat first with very fine paper before buffing, is this necessary?

    • Hi Jonny. You should send the clear coat slightly in the areas where you are going to be feathering. Just take wet sand the area a little. The paint will adhere better.

  16. thanks for the info i have a few deep scratches on my bumpers, i was wondering though will the touch up spot be very noticable compared to the rest of the bumper?

    • Hi Maurisa. Thanks for visiting my site. In order to make them unnoticeable you need to blend the paint in. When spray painting, just spray also the area around the scratch.

  17. Great work here, will give this a go, hoping the products can be bought in the UK. My scratch is very close to a chrome part on my bonnet, just above the grill, so not much room to feather the spraying, any tips?

  18. Hello Davis, I scratched my nissan micra 2 days after I go it :(. I looks/looked like this ( http://www.qsuzuki.com.au/cars-view.html?id=9437&car=2011-nissan-micra-st-k13- )
    My friend at work had some touchup paint which I used because I thought it would sorta fill the scratch but it didn’t help. Now it looks horrible. I really wanna fix it. What paint and primer would be best for my car. Also, can that sandpaper get rid of the touchup paint so that I can use the above explain method to fix the scratch?
    Thanks so much for your help, would love to like this page but I don’t have Facebook. Thanks so much though :)

  19. I have very deep scratches from a car accient with dents but mostly scratches would this video really help me to get those very deep scratches of my car

  20. Also if i do it right how the video tells my by just painting off the deep scratches would the fresh paint look more darker then the other paint around my car, would it be the same exact paint or would i be able to notice the difference between the two

  21. Just wanted to thank you for this article, I purchased all of those products for my Mercedes and was able to fixed it within a few hours, it’s spotless now. Really appreciate it.

  22. Hi,
    Very helpful article. Unfortunately, someone keyed my car badly from left to right on the back (Trunk) door of my Silver color Honda Odyssey 2006. I have uploaded the images of the damage at http://postimg.org/gallery/2cz3un3b8/

    I have the following question

    1) Will this method work to fix this big a scratch.

    2) I think the primer is still intact. Am I correct? Do I still need to apply the primer or should i move to the Step 6 after Step 4 (skipping Step 5)?

    3) If I need a primer, what color should I get? White?

    4) I am also planning to fix scratches on my plastic bumper. I will need a primer for that. Should I go with white?

    Thanks.

  23. My car had 2 thin long scratch (thinner than pencil erase and long about 4 inches), should i use Paint Pen or spray? If i spray, can i do it out side (because i dont have garage), i just afraid that the dust will stick in scratch in the waiting time of each processes, please answer me soon! Thank you so much!

Comments are closed.